ASAP Semiconductor

Request a Quote for 1D25383H01 by Miscellaneous

At Part 3sixty, we have Bracket Angle components listed as NSN part number 1D25383H01 by Miscellaneous along with a wide range of other parts that are readily available from a reliable manufacturer. In addition, we are the only independent distributors with the No China Sourcing pledge. Due to this, we are more vigilant in sourcing and inspecting our products, especially when it comes to the quality standards of our offerings. As a result, we can deliver premium quality 1D25383H01 NSN parts in a timely manner, making us one of the leading online distributors of aviation and electronic parts. 

Take advantage of our website’s search engine if you require specific parts such as fasteners, bearings, or any other part to support your aircraft. If you did not find your particular requirement that you need, you can also submit an instant RFQ, and one of our team members will contact you either through phone or email in less than 15 minutes. We are here to help our customers secure the parts that they need to effectively carry out their operations. Get in contact with a representative of ours at your earliest convenience, and they would be more than happy to assist you however necessary. At Parts 3sixty, we are more than just a dependable distributor of 1D25383H01 NSN parts; we are your strategic sourcing partner in an ever changing market.

Specifications

Part Number1D25383H01
DescriptionBracket Angle
ManufacturerMiscellaneous
NSN5340-01-341-0744(5340013410744)
Item NameBracket Angle
CAGE Code97942
NIIN01-341-0744(013410744)
FSC Code5340 Hardware Commercial
FSG Code53 Hardware and Abrasives
Part TypeBracket Angle
Sub Part Type—
INC Code16900
NCB Code01
CountryUSA
Specification—

Description

Bracket Angle

Request a Quote

Get pricing for 1D25383H01

Part Information

If You Have Multiple Parts Requirement, You Can Upload Your Parts List or BOM Here!

Contact Information

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number 1D25383H01 with NSN 5340-01-341-0744, 5340013410744

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5340013410744

Item Description:

Bracket Angle

53400134107440P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
1d25383h01523

Characteristics Data of NSN 5340-01-341-0744, 5340013410744

MRCCriteriaCharacteristic
ACHYMOUNTING HOLE TYPECOUNTERSUNK
ADLKFIRST LEG LENGTH0.880 INCHES NOMINAL
ADLLSECOND LEG LENGTH1.000 INCHES NOMINAL
AHLFSECOND LEG WIDTH13.260 INCHES NOMINAL
AHLKFIRST LEG HOLE DIAMETER0.147 INCHES MINIMUM AND 0.157 INCHES MAXIMUM
AHPWFIRST LEG THICKNESS0.125 INCHES NOMINAL
AHPXSECOND LEG THICKNESS0.125 INCHES NOMINAL
AHQNFIRST LEG WIDTH13.260 INCHES NOMINAL
AHQYFIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH2.500 INCHES NOMINAL
AHQZFIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH2.500 INCHES NOMINAL
AHRAFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.380 INCHES NOMINAL
AHREFIRST LEG DISTANCE BETWEEN THIRD AND FOURTH HOLE CENTERS ALONG WIDTH2.500 INCHES NOMINAL
AJZUFIRST LEG STYLESQUARE
AKBUSECOND LEG STYLESQUARE
AKCUSECOND LEG HOLE ARRANGEMENT STYLENO HOLE
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
CSSQFIRST LEG ANGLE90.0 DEGREES NOMINAL
CWMRFIRST LEG DISTANCE BETWEEN FOURTH AND FIFTH HOLE CENTERS ALONG WIDTH2.500 INCHES NOMINAL
FEATSPECIAL FEATURES6 HOLES
MATTMATERIALPLASTIC ACETAL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONL-P-392,TY2,CL 1 FED SPEC SINGLE MATERIAL RESPONSE
STYLSTYLE DESIGNATORANGLE