ASAP Semiconductor

Request a Quote for 114-024 by Mpc Products Corp

At Part 3sixty, we have Motor Control components listed as NSN part number 114-024 by Mpc Products Corp along with a wide range of other parts that are readily available from a reliable manufacturer. In addition, we are the only independent distributors with the No China Sourcing pledge. Due to this, we are more vigilant in sourcing and inspecting our products, especially when it comes to the quality standards of our offerings. As a result, we can deliver premium quality 114-024 NSN parts in a timely manner, making us one of the leading online distributors of aviation and electronic parts. 

Take advantage of our website’s search engine if you require specific parts such as fasteners, bearings, or any other part to support your aircraft. If you did not find your particular requirement that you need, you can also submit an instant RFQ, and one of our team members will contact you either through phone or email in less than 15 minutes. We are here to help our customers secure the parts that they need to effectively carry out their operations. Get in contact with a representative of ours at your earliest convenience, and they would be more than happy to assist you however necessary. At Parts 3sixty, we are more than just a dependable distributor of 114-024 NSN parts; we are your strategic sourcing partner in an ever changing market.

Specifications

Part Number114-024
DescriptionMotor Control
ManufacturerMpc Products Corp
NSN6105-00-959-5321(6105009595321)
Item NameMotor Control
CAGE Code19710
NIIN00-959-5321(009595321)
FSC Code6105 Motors Electrical
FSG Code61 Electric Wire, and Power and Distribution Equipment
Part TypeMotor Control
Sub Part Type—
INC Code19258
NCB Code00
CountryUSA
Specification—

Description

Motor Control

Request a Quote

Get pricing for 114-024

Part Information

If You Have Multiple Parts Requirement, You Can Upload Your Parts List or BOM Here!

Contact Information

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number 114-024 with NSN 6105-00-959-5321, 6105009595321

NSNFSCNIINCLSHazmatDEMILCancelled NSN
6105009595321

Item Description:

Motor Control

61050095953210N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
114-024223

Characteristics Data of NSN 6105-00-959-5321, 6105009595321

MRCCriteriaCharacteristic
AAJTOVERALL HEIGHT0.906 INCHES"
AAJUIII OVERALL LENGTH1.250 INCHES"
AAJVOVERALL WIDTH0.906 INCHES"
AAUHSPLINE MINOR DIAMETER0.0468 INCHES NOMINAL SINGLE END"
ABSASPLINE QUANTITY13 SINGLE END"
ABWVSHAFT DIAMETER0.1247 INCHES NOMINAL SINGLE END"
ACDCCURRENT TYPEAC INPUT"
ANPZINCLOSURE FEATURETOTALLY INCLOSED"
AXFHSPLINE LENGTH0.2812 INCHES NOMINAL SINGLE END"
AXGYMOUNTING METHODCLAMP RING"
AXHRMOUNTING FACILITY TYPE AND QUANTITY1 CLAMP COLLAR"
BFMFCOOLING METHODNONVENTILATED"
BFMJCONTROL FIELD CURRENT RATING IN AMPS0.076 AND 0.038"
BFMKCONTROL FIELD IMPEDANCE RATING IN OHMS758.0 AND 3030.0"
BFMLCONTROL FIELD WINDING TYPETWO WINDINGS, PARALLEL CONNECTED OR TWO WINDINGS, SERIES CONNECTED"
BKPBCURRENT RATING METHODNO LOAD"
BKPHTORQUE RATING AND TYPE0.27 INCH-OUNCES STALLED"
BKPQINCLOSURE SPECIFICATIONCOMMERCIAL"
BKPSCONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS57.5 AC AND 115.0 AC"
CBBLFEATURES PROVIDEDHORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION"
CWCSLENGTH OF SHAFT FROM HOUSING0.219 INCHES SINGLE END"
CWDYTEMP RATING50.0 AMBIENT DEG CELSIUS AND -55.0 OPERATING DEG CELSIUS AND 100.0 OPERATING DEG CELSIUS"
CWFXROTOR SPEED RATING IN RPM10000.0 SINGLE NO LOAD"
CWGLCURRENT RATING IN AMPS0.038 SINGLE INPUT"
CWGQCONNECTION TYPE AND VOLTAGE RATING IN VOLTS115.0 LINE TO NEUTRAL SINGLE INPUT"
CWHZSHAFT END CHARACTERISTICA14 SINGLE STYLE SINGLE END"
FAAZPHASETWO INPUT"
FREQFREQUENCY IN HERTZ400.0 INPUT"
TTQYTERMINAL TYPE AND QUANTITY6 SOLDER LUG"
AAJTOVERALL HEIGHT0.906 INCHES"
AAJUIII OVERALL LENGTH1.250 INCHES"
AAJVOVERALL WIDTH0.906 INCHES"
AAUHSPLINE MINOR DIAMETER0.0468 INCHES NOMINAL SINGLE END"
ABSASPLINE QUANTITY13 SINGLE END"
ABWVSHAFT DIAMETER0.1247 INCHES NOMINAL SINGLE END"
ACDCCURRENT TYPEAC INPUT"
ANPZINCLOSURE FEATURETOTALLY INCLOSED"
AXFHSPLINE LENGTH0.2812 INCHES NOMINAL SINGLE END"
AXGYMOUNTING METHODCLAMP RING"
AXHRMOUNTING FACILITY TYPE AND QUANTITY1 CLAMP COLLAR"
BFMFCOOLING METHODNONVENTILATED"
BFMJCONTROL FIELD CURRENT RATING IN AMPS0.076 AND 0.038"
BFMKCONTROL FIELD IMPEDANCE RATING IN OHMS758.0 AND 3030.0"
BFMLCONTROL FIELD WINDING TYPETWO WINDINGS, PARALLEL CONNECTED OR TWO WINDINGS, SERIES CONNECTED"
BKPBCURRENT RATING METHODNO LOAD"
BKPHTORQUE RATING AND TYPE0.27 INCH-OUNCES STALLED"
BKPQINCLOSURE SPECIFICATIONCOMMERCIAL"
BKPSCONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS57.5 AC AND 115.0 AC"
CBBLFEATURES PROVIDEDHORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION"
CWCSLENGTH OF SHAFT FROM HOUSING0.219 INCHES SINGLE END"
CWDYTEMP RATING50.0 AMBIENT DEG CELSIUS AND -55.0 OPERATING DEG CELSIUS AND 100.0 OPERATING DEG CELSIUS"
CWFXROTOR SPEED RATING IN RPM10000.0 SINGLE NO LOAD"
CWGLCURRENT RATING IN AMPS0.038 SINGLE INPUT"
CWGQCONNECTION TYPE AND VOLTAGE RATING IN VOLTS115.0 LINE TO NEUTRAL SINGLE INPUT"
CWHZSHAFT END CHARACTERISTICA14 SINGLE STYLE SINGLE END"
FAAZPHASETWO INPUT"
FREQFREQUENCY IN HERTZ400.0 INPUT"
TTQYTERMINAL TYPE AND QUANTITY6 SOLDER LUG"